Controlled Products Systems Group 1503-080 - Manual (Page 17)

Page 17
When operating the 1503 digital keypad entry device, each time a keypad button is pressed, a .2
second tone confirms the key press. This tone is not emitted during programming. When using the
four-digit entry codes or four-digit hold codes, the # key must be pressed first. When using the five-
digit entry codes, simply enter the five-digit code on the keypad.
3.1 Four-digit Entry Codes
To use a four-digit entry code, press the # key, and then enter the four-digit entry code. If a valid code
has been entered, the relay will activate for its programmed strike time and a tone will sound during
the relay activation period. If the relay is already activated by a HOLD code, entering a valid four-digit
entry code will cause the relay to deactivate.
3.2 Four-digit Hold Code
To use a four-digit hold code, press the # key, and then enter the four-digit hold code. If a valid code
has been entered, the relay will activate and a tone will sound for the relay strike time setting. After
the relay strike time runs out, the tone will stop but the relay will remain activated. To release a relay
that is being held, enter the four-digit hold code, or a valid four or five-digit entry code, or activate the
key switch input. A tone will sound for the programmed strike time, then the relay will release.
3.3 Five-digit Entry Codes
To use a five-digit entry code, enter the five-digit code on the keypad. If a valid code has been
entered, the relay will activate for its programmed strike time and a tone will sound during the relay
activation period. If the relay is already activated by a HOLD code, entering a valid five-digit entry
code will cause the relay to deactivate.
3.4 Request to Exit Input
A switch closure across terminals 4 and 5 will cause the relay to activate for the programmed strike
time and emit a tone during the activation period. If the relay is already activated by a HOLD code, a
switch closure across terminals 4 and 5 will cause the relay to deactivate.
SECTION 3 – OPERATING INSTRUCTIONS
DIGITS ENTERED
1 2 3 4 5
Master Code
4-Digit Code 1
4-Digit Code 2
4-Digit Hold Code 1
4-Digit Hold Code 2
5-Digit Code 1
5-Digit Code 2