beautypg.com

Mxs 5.0, 12v/5a, Mode – CTEK MXS 5.0 TEST AND CHARGE User Manual

Page 3: Recond

background image

EN • 5

EN

CHARGING PROGRAMS AND OPTIONS

Press the MODE-button to select between the charging programs and to add charg-

ing options. The lamps will indicate which programs and options that are selected. The

selected program will be memorised and restarted next time the charger is connected.

Charging Programs

Program

Battery

Size (Ah)

Explanation

Temp range

1.2–14Ah

Small battery

program, 0.8A

Use for smaller batteries.

-20°C–+50°C

(-4ºF–122ºF)

14–160Ah

Normal battery

program, 5A

Use for normal sized batteries.

-20°C–+50°C

(-4ºF–122ºF)

Charging Options

Option

Battery

Size (Ah)

Explanation

Temp range

1.2–160Ah

Cold weather option

Use for charging at low tempera-

tures and for power AGM batteries

like Optima

®

and Odyssey

®

. Cold

weather option increases charging

voltage

-20°C–+5°C

(-4ºF–41ºF)

RECOND

1.2–160Ah

Recond option

Use to return energy to empty bat-

teries. Recond your battery once per

year and after deep discharge to

maximise lifetime and capacity. The

Recond option adds STEP 6 to the

selected charging program.

-20°C–+50°C

(-4ºF–122ºF)

BATTERY SIZE (Ah)

TIME TO 80% CHARGED

2Ah

2h

8Ah

8h

20Ah

4h

60Ah

12h

110Ah

26h

READY TO USE

The table shows the estimated time for an empty battery to reach 80% charge level

ERROR LAMP

If the error lamp is lit, check the following:

1. Is the chargers positive lead connected to the bat-

tery's positive pole?

2. Is the charger connected to a 12V battery?
3. Has charging been interrupted in STEP 1, 2 or 5?

Restart the charger by pressing the MODE-button. If charging is

still being interrupted, the battery...

STEP 1: ...is seriously sulphated and may need to be replaced.

STEP 2: ...cannot accept charge and may need to be replaced.

STEP 5: ...cannot keep charge and may need to be replaced.

MODE

RECOND

12V/5A

MXS 5.0

POWER LAMP

If the power lamp is lit with a:

1. STEADY LIGHT

The mains cable is connected to the wall socket.

2. FLASHING LIGHT

The charger has entered the energy save mode. This happens if

the charger isn't connected to a battery in 2 minutes.