CTEK XC 0.8 - Manual

EN
EN • 3
6V/0.8A
XC 0.8
charging
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The error lamp will indicate if the battery
clamps are incorrectly connected. The reverse polarity protection will ensure that the
battery or charger will not be damaged.
3. Follow the indication lamps through the charging process.
The battery is fully charged when is lit.
4. Stop charging at any time by disconnecting the mains cable from the wall socket.
cOngraTULaTiOnS
to the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.
cTEK cOMFOrT cOnnEcT – eyelet M6
6V/0.8A
XC 0.8
cTEK cOMFOrT cOnnEcT
MainS caBLE
DESULPHATION
BULK
ABSORPTION
FULLY chargED
PULSE, MainTEnancE charging
cTEK cOMFOrT cOnnEcT – clamp
chargE caBLE
SUPPLY PLUg*
*Supply plugs may differ to suit your wall socket.
ManUaL
ErrOr LaMP