Alpine SEC-150R - Manual (Page 12)

English
12
Disarming
The SEC-100S/150R can be disarmed
either by the remote control transmitter or
manually using the disarm/valet switch.
Remote Controlled
Disarming
Press the TX button to disarm the security
system.
(The remote control LED will illuminate to
indicate that the signal is being transmit-
ted.)
Disarm/Valet Switch
Disarming
1. Enter the vehicle. The security system
will sound the siren.
2. Turn the ignition switch to the ON
position.
3. Within 5 seconds, find the Disarm/Valet
switch and turn it to the ON position. If
within 5 seconds the Disarm/Valet switch
is not found, the security system must be
retriggered into alarm mode again in
order to disarm the system using the
Disarm/Valet switch.