Asus TS300-E5 - Manual (Page 105)

ASUS TS300-E5 5-13
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode.
Configuration options: [Auto] [SWDMA0~2] [MWDMA0~2] [UDMA0~6]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration
options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
ATA/IDE Configuration [Enhanced]
Disables or allows selection of the IDE operation mode depending on the operating
system (OS) that you installed. Set to [Enhanced Mode] if you are using native
OS, such as Windows ® 2000/XP/Vista. Set to [Compatible Mode] if you are using
legacy OS, such as Windows ® ME/98/NT and MS-DOS.
Configuration options: [Disabled] [Compatible Mode] [Enhanced Mode]
5.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press if you wish to
configure the item.
IDE Configuration
ATA/IDE Configuration [Enhanced]
Configure SATA as [IDE]
Hard Disk Write Protect [Disabled]
IDE Detect Time Out (Sec) [35]
ATA(PI) 80Pin Cable Detection [Host]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Main
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Options
Disable
Compatible
Enabled