Comprehensive CSC-550 - Manual (Page 8)

6
6 Controlling the CSC-550
The CSC-550 can be controlled directly via the front panel buttons (see section
6.1), via the OSD menu (see section 6.2), and/or remotely from the infra-red
remote control transmitter (see section 6.3).
6.1 Controlling via the Front Panel Buttons
The CSC-550 includes the following control front panel buttons:
An RGB/RESET button for setting the output to either RGB or Y, Pb, Pr
or resetting 1 the resolution to VGA or 480p
CONTROL buttons, including the MENU, ENTER, + and – buttons
INPUT SELECTOR buttons for selecting the required input (CV, YC,
COMP. or SXGA)
6.2 Using the CONTROL Buttons
The CONTROL buttons let you control the CSC-550 via the OSD menu:
Press the MENU button to enter the menu 2
Press the ENTER button to accept changes and to change the menu
settings
Press the + and – buttons to move through the OSD menu, which is
displayed on the video output, or adjust the PICTURE parameters
On the OSD menu, select EXIT to exit the menu.
6.2.1 The MAIN MENU
Table 4 defines the MAIN MENU features and functions.
Table 4: The MAIN MENU Features
Mode Function
PICTURE Set the picture parameters (contrast, brightness, color, hue, detail and reset), see
section 6.2.2
SOURCE Select the desired input source: video, s-Video, Y, CB, CR or computer
RESOLUTION After selecting the output type 3 , select between the RGB output resolutions (VGA,
SVGA, XGA or SXGA) or the YPbPr output resolutions (480p, 576p, 720p or 1080i)
SETUP Select the aspect, output, 3D enhance, digital NR, display and HV output (see section
6.2.3)
INFORMATION Displays the source, resolution and software version
EXIT
Select to exit the menu
1 Press for 3 seconds to reset to VGA and press for 10 seconds to reset to 480p
2 The menu times out after 8 seconds
3 By pressing the RGB/RESET button or via the OSD menu