CognitiveTPG B780 - Manual (Page 17)

12 Chapter 3: Setting up the Printer
B780 Two-Color Thermal/Impact Hybrid Printer: User Guide B780 UG00001 B 10/06
Keep the packaging
The packing materials protect the printer and help
prevent damage. Be sure to save all the packaging
materials, including the cardboard supports in the slip
path.
Remove and save the cardboard supports from the slip
path after you have placed the printer in its user position.
Unpack the printer
Report Missing or Damaged Items
To report any missing materials, or to report a printer
that was damaged during shipment, call your supplier or
call a TPG representative at:
Sales/General Information (800) 732–8950
Service/Operational Questions (877) 209–0156
– or –
You can also contact us by e-mail:
Visit our web site at www.tpgprinters.com and simply
click on “Contact Us” on the main page.
Remove internal restraint items
Packing materials protect the printer from being
damaged during shipment. Remove these items after
you set up the printer and save them in case you need to
ship or move the printer elsewhere in the future.
Check the packing list
Before you set up a new printer, make sure that all of the
items listed below are provided. Printers shipped in bulk
may not include all these items:
Printer
Thermal receipt sample paper roll
Test printout protecting the print head (inside
receipt bucket)
Cardboard support for cantilever (on slip table)
Power supply with cables connecting to printer and
to power outlet (only if ordered with the printer)
Ribbon cassette
Setup Guide •
•
•
•
•
•
•
A776 Unpack left side.eps