CNB IBP5030CR - Manual (Page 47)

XNET User Manual
47 / 48
ITEM DESCRIPTION
Area
Displays currently defined Motion Detection area.
When an area is selected from the list, its defined area gets displayed and
highlighted in viewer window. Up to 3 motion detection area can be defined.
Show selected area When this is checked, only the selected area gets displayed in viewer window.
Caption Enter designation for each area.
Sensitivity
Sets sensitivity for detecting motions, “1” being the least sensitive and “10”
being the most sensitive. The user needs to configure this according to their
applications and circumstances.
Defining Motion
Detection Area
1. Enter a designation in the caption bar, and set sensitivity.
2. Click “Add” button.
3. A square with the designation you’ve just defined will appear in viwer
window.
4. The size of the square can be adjusted by clicking and dragging its
lower right corner, and the position can be adjusted by dragging the
square.
5. Click “Save” button once you are done definging the areas.