CNB IBP5030CR - Manual (Page 28)

XNET User Manual
28 / 48
ITEM DESCRIPTION
Video Output
Format
Video Format
Selects Video format at Video Out terminal between
NTSC and PAL.
Enable Video
Output
Turns the Video Out feature on or off.
White Balance
White Balance
Configures Video’s White Balance.
White Balance means balancing color temperature by adjusting Red
and Blue level.
Auto mode will adjust White Balance automatically, while manual
mode will adjust white balance level according to manually configured
Red and Blue level.
Red Control
Select Video’s Red level between brightness of 0 and 255.
This can only be enabled when White Balance is configured as Manual
mode.
Blue Control
Select Video’s Blue level between brightness of 0 and 255.
This can only be enabled when White Balance is configured as Manual
mode.
Push Push will adjust White Balance automatically in manual mode
Read Displays current configurations for Red and Blue level.
Video Setting
Brightness Select Brightness of Video between 5 and 255.
Saturation Select Color Saturation of Video between 0 and 7.
Sharpness Select Sharpness of Video between contrast 0 and 7.
Back Light
Compensation
Turns Back Light Compensation on or off.
When enabled, the images will not be saturated even when too much
light comes into the Lens.
Color/Mono Selects between Color/Mono of the Video.
Day/Night Selects between Auto/Day/Night for IR LED.
Gain &
Shutter
Condition
Exposure
Configures Exposure of Video.
Exposure means to control brightness of video by adjusting Gain
value.
In auto mode, Exposure will automatically be adjusted to proper level
according to its selected Indoor or Outdoor type. In Manual mode,
Exposure will be adjusted to the gain value entered.
Gain Control
Select Gain level of Video between
0 – 7 only in Manual Exposure mode.
Shutter Speed
Control
Configures Camera’s Shutter Speed.
High Shutter Speed can capture a quick movement accurately, but
Video gets noisy while it tries to maintain brightness level properly.
Low Shutter Speed reduces Video Noise, but it will not catch quick
movement very well. In Manual mode, shutter speed will be
configured value. In Auto mode, shutter speed will be changed
automatically from highest value to configured value.
In Auto mode, we recommend configuring the lowest value.
Save - Applies and Saves the configurations.
Reset - Recalls previously saved configurations.