CNB IXC2050IR User Manual

Page 11

XNET Network Weatherproof Camera Installation Guide

11/20

3.1.2 Installing XNET

 Connect XNET to PC directly

User can monitor and configure XNET camera by connecting it to your PC directly.

A. Connect XNET camera to your PC directly using a LAN cable like below.

NOTE:

XNET camera’s IP address will be automatically set to the default

value, 192.168.123.100, after connecting XNET camera to your PC

directly. (This process approximately takes 20~30 seconds)

B. Please follow the direction to modify PC’s network configuration.

Windows Start  Control Panel  Network Connections  Right-clicks on the Local Area Connection
icon  Double click on the Internet Protocol (TCP/IP) icon.
Please set PC’s network configuration like below.

NOTE:

IP address for PC can be set from 192.168.123.2 to 192.168.123.254. Since

XNET camera’s IP address is already set to 192.168.123.100, you cannot allocate this

IP address to PC.

COMPUTER

Crossover Network Cable