Spec sheet, Specifications – ADC FlexWave MMW 125 User Manual

Page 4

Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080

Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site.

ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer

Spec

Sheet

Specifications

Frequency Band:

71 - 76 GHz; 81 - 86 GHz

RF Interface:

FDD

Modulation:

DBPSK

Frequency Source:

Synthesizer

Configurations:

Non-Protected

Hot Standby

Repeater

Mesh

Latency:

<10 usec

Forward Error Correction:

Reed Solomon

PHYSICAL (Including radio, antenna & mount)

0.3 m /1 ft

0.6 m/2 ft

Weight:

11.79 kg (26.0 lbs)

15.42 kg (34 lbs)

Dimensions (WxHxD):

30 x 53 x 35.5 cm

40.6 x 68.5 x 66 cm

(12" x 21" x 14")

(16" x 27" x 26")

TRIBUTARY
Data Rate:

1250 Mbps full duplex (Gigabit Ethernet)

Standards Compliance:

IEEE 802.3z

Interface Options:

Fiber 850 nm Multi Mode, LC connector

Fiber 1310 nm, Single Mode, LC connector

1000Base-SX to 1000BaseT

ELECTRICAL
Input Voltage:

-48 VDC (-40.5 to -57VDC)

ENVIRONMENTAL
Operating Temperature Range:

-27° to +131°F (-33° to +55°C)

Altitude:

15,000 ft (4500 m)

MANAGEMENT

Craft Interface Embedded web based (HTML) server

EMS SNMP

Voltmeter testpoints for Received Signal Strength

REGULATORY
FCC:

1.1310 RF MPE limits

Part 101

ANTENNA

0.3 m/1ft

0.6 m/2 ft

43.8 dBi

51 dBi

<0.9°BW

<0.4°BW

Fine adjust pole mount fitting 6.35 cm (2.5") to 11.43 cm(4.5") OD