Lcd remote operation – Autostart AS-2510 TW User Manual

Page 5

Parking Countdown

This version of the Countdown feature is particularly useful for keeping track of parking

meter time: the user may quickly set up the countdown in slices of 10 or 30 minutes using

the

and

buttons (refer to the tables).

Melody Selection

The Remote Control allows the user to select which melodies are to be used upon the

following events: remote starting of the vehicle, the Alarm, ending of the countdown,

entering Cold Weather Mode. Melodies for these various events can be selected using the

button (refer to the tables).

Vibration Mode

Use this feature to replace audible signals with a vibration signal. Use the

and

buttons to switch Vibration Mode ON and OFF (refer to the tables).

Power Saving Mode

When set to Power Saving Mode, the Remote Control will cease polling the Remote Starter

Module on a regular basis for status information. This will extend battery life. Use the

and

buttons to switch Power Saving Mode ON and OFF (refer to the tables).

Remote Control Finder

This function allows the user to locate the Remote Control when it has been accidentally

dropped near the vehicle. Pressing the Valet Button and holding it down for 3 seconds (or

until the Parking Lights flash five times) will cause the Remote Control to start beeping for

one minute. The beeping will stop by itself after one minute, or it can be switched off by

pressing the Lock (

) or the Unlock (

) button on the Remote Control.

LCD Remote Operation

(First Car Control)

NOTE:

The following section explains the functions the Transmitter can provide. If you wish to exit
a function while you are accessing it, simply stop and wait at least 10 seconds, the
Transmitter will return to normal.

Basic Vehicle Operations

FUNCTION

BUTTON PRESSED

ICON

BUZZER

INSTRUCTIONS /DESCRIPTION

LOCK

1 Beep

LOCK AND ARM THE STARTER

KILL

UNLOCK

2 Beep

UNLOCK AND DISARM THE

STARTER KILL

TRUNK OR AUX 3

1 Beep

TRUNK OUTPUT

START *

(See Runtime

Options below)

MELODY

START THE ENGINE

STOP

None

MELODY

STOP THE ENGINE

Light ON

ON for 10 seconds

Press

once

P. 5

User Guide

AS-2510 TW