INTELLINET NETWORK 525275 Wireless 450N Dual-Band USB Adapter User Manual - Manual (Page 28)

28
CONFIGURATION
AP Setup
Now that your computer acts as a wireless access point, you can give the network
a proper name so that other computers can easily find it. Enter a new name for
your wireless network in the SSID field or leave the current one. If you don’t want
to openly broadcast the name of the network, activate the Hide SSID option.
The wireless mode is of importance on systems running a dual-band wireless
adapter as it defines which frequency band, 2.4 or 5 GHz, is to be used for the
access point. If you aren’t sure what to use, it’s always good advice to keep the
value at 2.4 GHz. Click the right arrow to move to the next screen.
You can adjust the wireless channel on the next screen. For optimal performance,
it’s best to use a channel that is furthest away from other wireless networks. For
Wireless
signal
is
active
Wireless
connection
is
not
encrypted
AP
mode
is
active
AP
Setup
Advanced
settings
Access
Control
List
Connected
devices