Asus A7V133-M - Manual (Page 28)

28 ASUS A7V133-M User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
4) Serial Port Connectors (Teal/Turquoise 9 pin COM1 / COM2)
Two serial ports can be used for pointing devices or other serial devices. For
setting up these ports. (See Onboard Serial Port 1 in 4.4.2 I/O Device
Configuration for settings.)
COM2 COM1
Serial Ports (9-pin Male)
3) Universal Serial BUS Ports 0 & 1 (Black two 4 pin USB)
Two USB ports are available for connecting USB devices. If these are not enough,
a USB header is available for two additional USB port connectors. See USB
Headers later in this section.
Universal Serial Bus (USB) 2
USB 1
5) Parallel Port Connector (Burgundy 25 pin PRINTER)
You can enable the parallel port and choose the IRQ through Onboard Parallel
Port (See 4.4.2 I/O Device Configuration).
NOTE: Serial printers must be connected to the serial port.
Parallel Port (25-pin Female)