beautypg.com

Features, 2 special features, 3 optional components – Asus A7V133-M User Manual

Page 10: 4 performance features

background image

10

ASUS A7V133-M User’s Manual

2. FEATURES

Performance

2. FEA

TURES

2.1.2 Special Features

ACPI Ready: Advanced Configuration Power Interface (ACPI) provides more
Energy Saving Features for operating systems that support OS Direct Power
Management (OSPM) functionality. With these features implemented in the OS,
PCs can be ready around the clock, yet satisfy all the energy saving standards.
An ACPI-supported OS like Windows 98 must be used for ACPI.

Easy Installation: Incorporates BIOS that supports autodetection of hard disk
drives, PS/2 mouse, and Plug and Play devices to make the setup of hard disk
drives, expansion cards, and other devices virtually automatic.

New Compliancy: Both the BIOS and hardware levels of this motherboard meet
the stringent requirements for PC 99 certification The new PC 99 requirements
for systems and components are based on the following high-level goals: Sup-
port for Plug and Play compatibility and power management for configuring
and managing all system components, and 32-bit device drivers and installation
procedures for Windows95/98/NT . Color-coded connectors and descriptive icons
make identification easy as required by PC 99.

Symbios SCSI BIOS: Supports optional ASUS SCSI controller cards through
the onboard SYMBIOS firmware.

2.1.3 Optional Components

Onboard PCI Audio Controller: A single chip by Creative

®

Audio supports

advanced Audio performance.

Realtek

®

RTL8139C Ethernet: A single chip fast ethernet controller for 100/

10 Mbps capacity that supports WOL (Wake-On-LAN) feature.

2.1.4 Performance Features

Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI mas-
ter busses to the memory and processor.

High-Speed Data Transfer Interface: IDE transfers using UltraDMA/33 Bus
Master IDE can handle rates up to 33MB/s. This chipset supports UltraDMA/
100, tripling the data transfer rate to 100MB/s. UltraDMA/100 is backward
compatible with DMA/66/33 and with existing DMA devices and systems, so
there is no need to upgrade current EIDE/IDE drives and host systems.
(UltraDMA/100 requires a 40-pin 80-conductor.)

VCM/SDRAM Optimized Performance: This motherboard supports a new gen-
eration memory, NEC

®

’s 64Mb Virtual Channel Memory (VCM) Synchronous Dy-

namic Random Access Memory (SDRAM), which is compatible to the industry
standard SDRAM. The VCM’s core design provides up to 50% higher SDRAM
speed at reduced power consumption of about 30%. This motherboard also supports
standard SDRAM, which increases the data transfer rate (1.064GB/s max using
PC133-compliant SDRAMs and 800MB/s max using PC100-compliant SDRAMs).

This manual is related to the following products: