Hardware setup, 2 layout contents – Asus A7V133-M User Manual
Page 15
ASUS A7V133-M User’s Manual
15
3. HARDWARE SETUP
3.2 Layout Contents
Motherboard Settings
1) JEN
p. 17 Jumper Mode (Default)
2) SW1_A 1–5
p. 18 200 MHz FSB Setting
3) SW1_B 1–5
p. 18 266 MHz FSB Setting
4) SW1_C 1–5
p. 19 CPU External Frequency Setting
Expansion Slots/Sockets
1) System Memory
p.21 System Memory Support
2) DIMM1/2
p.22 DIMM Memory Module Support
3) Socket 462 (Socket A) p.23 CPU Support
4) PCI1/2/3
p.26 32-bit PCI Bus Expansion Slots
5) AGP
p.27 Accelerated Graphics Port (AGP)
Connectors
1) PS2KBMS
p.27 PS/2 Mouse Port Connector (6 pin female)
2) PS2KBMS
p.27 PS/2 Keyboard Port Connector (6 pin female)
3) USB
p.28 Universal Serial Bus Connectors 0 & 1 (Two 4 pin female)
4) COM1/COM2
p.28 Serial Port Connector (9-pin male)
5) PRINTER
p.28 Parallel Port Connector (25 pin female)
6) GAME_AUDIO
p.29 Game/MIDI Connector (15 pin female) (optional)
7) GAME_AUDIO
p.29 Audio Port Connectors (Three 1/8” female) (optional)
8) RJ45
p.29 Fast-Ethernet Port Connector (RJ45) (optional)
9) PRIMARY IDE
p.30 IDE Connectors (Two 40-1 pin)
SECONDARY IDE
10) FLOPPY
p.30 Floppy Disk Drive Port Connector (34 pin)
11) CHASS
p.31 Chassis Intrusion Lead (4-1 pin)
12) IR
p.31 Infrared Module Connector (5 pin)
13) WOL_CON
p.32 Wake-On-LAN Connector (3 pin)
14) WOR
p.32 Wake-On-Ring Connector (2 pin)
15) CPU_, PS_, CHASS_FAN p.33 Chassis, Power Supply, CPU Fan Connectors (3 pin)
16) CD_IN, AUX, MODEM
p.34 Internal Audio Connectors (Four 4 pin)
17) HPHONE
p.34 Headphone True-Level Out Header (3 pin)
18) USB2
p.35 USB Header (10-1 pin)
19) SMB
p.35 SMBus Connector (5-1 pin)
20) ATXPWR
p.36 ATX Power Supply Connector (20 pin)
21) IDELED
p.36 IDE Activity LED (2 pin)
22) SPEAKER (PANEL)
p.37 System Warning Speaker Connector (4 pin)
23) PWR.LED (PANEL)
p.37 System Power LED Lead (3 pin)
24) RESET (PANEL)
p.37 Reset Switch Lead (2 pin)
25) PWR.SW (PANEL)
p.37 ATX / Soft-Off Switch Lead (2 pin)
26) SMI (PANEL)
p.37 System Management Interrupt Lead (2 pin)
Layout Contents
3. H/W SETUP