Hach-Lange Filter probe sc - Manual (Page 19)

17
Installation
Important note: Only install the filtration probe sc in flowing water
with protection against flow.
Install the filtration probe sc so that is it held min. 0.1 m and max.
3 m below the surface of the water.
In case of frost, insulate the first 10 cm of the tubing if the top edge
of the filtration probe sc is not at least 20 cm below the surface of
the water.
Figure 6 Installation of the rim mounting LZX414.00.5000
1 Base 6 Flat bar
2 Quick-fit anchors (4) 7 Screws
3 Plug 8 Screws M5 × 16 mm (6×)
4 Spring cotter 9 Filtration probe tubing
5 Mounting pipe 10 Filtration probe sc