Hach-Lange H170 User Manual - Manual (Page 19)

Table 2 Error code descriptions (continued)
Error code Description Solution
E13 The ISFET pH probe temperature
sensor is out of range. Replace the probe. Contact
technical support for probe
replacement information.
E20 The conductivity probe temperature
sensor is out of range. Replace the probe. Contact
technical support for probe
replacement information.
Replacement parts and accessories
W A R N I N G
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Replacement parts
Description Quantity Item no.
AA Alkaline batteries 4 1938004
Accessories
Description Quantity Item no.
ISFET pH probes
General purpose round tip probe 1 PH77-SS
Micro pH probe 1 PH17-SS
Piercing tip micro pH probe 1 PH37-SS
pH probe for NMR tubes 1 PH47-SS
Heavy duty piercing tip micro pH probe 1 PH57-SS
Conductivity probes
General purpose conductivity probe, epoxy, K = 0.5 4 graphite contacts CDW97-KP5
LIS conductivity probe, glass, K = 1 4 platinum contacts CDW97-K1
Conductivity probe for salinity and brackish water, epoxy, K =
10
4 contacts CDW97-K10
Glass pH probes
Gel-filled combination pH, BNC and 3.5 mm phone 1 5193511
Pt Series combination pH, BNC and 3.5 mm phone 1 5191011
Refillable combination pH, BNC and 3.5 mm phone 1 5194011
English 19