Clear-Com Concert for Newsroom - Manual (Page 31)

31 Server Installation Guide
Modifying TCP port 6001
Warning:
Modification of TCP port 6001 is not recommended owing to the number of changes required throughout the
Concert system.
To modify TCP port 6001:
1. On the Concert Server, within the directory /usr/local/clearcom/concert/bin, edit the file ems.conf.
Update the port value associated with the gccpl_port attribute.
2. In each Concert Client application, go to the server configuration dialog
(Config [ ] > Server).
Modify the value of the Login Server Port so it matches the value you specified in the
ems.conf file in Step 1. Click Save.
3. Restart the EMS application:
# sudo service ems restart
5.1.2 IV-R ports
The IV-R application listens to the following ports by default:
Port Description
UDP port 6001 Port must be available between the Concert Server and all
Concert Clients and Channels.
TCP port 8006 Port used by the EMS application to retrieve statistical information
about Clients connected to the IV-R application (see below).
Note:
If the IV-R application is not running on the same server as the
EMS, this port will need to be accessible on the network between
the EMS and IV-R.
Table 7: IV-R default ports