Clear-Com Concert for Newsroom - Manual (Page 18)

18 Server Installation Guide
5. Select the eth0 device and press
6. Using the spacebar, uncheck the Use DHCP option and enter the Static IP address information
retrieved during Step #1
Figure 6: Statically configuring the server IP address
7. Using the arrow keys, select Ok and press
8. Using the arrow keys, select Save and press
9. Using the arrow keys, select Save&Quit and press
10. Reboot the server to apply your changes.
11. Once restarted, you should see the IP address displayed above the login prompt.
3.1.3 Configuring the server date/time settings
You may wish to configure the server’s date/time for your specific geographical location.
To configure the server date/time settings:
1. Power on the Concert Server and login as root (default password=concert).
2. At the prompt, type date [mmddhhmmyyyy]. Press Enter.
mm = two digit month
dd = two digit day
hh = two digit hour
mm = two digit minute
yyyy = four digit year