Clear-Com Concert for Newsroom - Manual (Page 29)

29 Server Installation Guide
4.4.4 Restarting the Interface Gateway service
To restart (stop and then start) the Interface Gateway service, type:
# sudo service ifgateway restart
The following output is returned:
Stopping Interface Gateway instance #1 [ OK ]
Stopping Interface Gateway instance #2 [ OK ]
Starting Interface Gateway instance #1 [ OK ]
Starting Interface Gateway instance #2 [ OK ]
4.4.5 Discovering the status of the Interface Gateway service
To discover the status of the Interface Gateway, type:
# service ifgateway status
The following output is returned (telling you if the Interface Gateway is either running or stopped).
Concert Interface Gateway #1 (pid 31545) is running…
Concert Interface Gateway #2 (pid 31704) is running…
Concert Interface Gateway #1 is stopped.
Concert Interface Gateway #2 is stopped
Note:
The pid is the process identification number.
4.4.6 Managing the Interface Gateway in the CMI.
The web-based CMI (Concert Management Interface) is used to configure and manage the Interface
Gateway.
Configuration and management tasks include:

Adding and removing Interface Gateway nodes

Updating the Interface Gateway settings

Configuration and control of Port-Channel connections.
For more information, see:

4.2.9 CMI

The Concert Administrator Guide
4.4.7 Interface Gateway configuration file
The Interface Gateway configuration file (ifgateway.conf) should only be edited when modifying TCP and
UDP ports utilized by Concert.
For more information, see 5 Advanced configuration.