Hydrotech Precision-PWS 8-8 OWNERS GUIDE - Manual (Page 26)

26
3. To replace the storage tank lid, tip the lid so that the Tee Bar bracket slips
under the rim of the storage tank opening on one side, and then slide the
lid so the Tee Bar bracket slips under the other side of the rim. Center the
lid.
4. While lifting up on the storage tank lid knob, turn clockwise to tighten the
lid onto the storage tank. Tighten until snug only.
Water Distiller Wall Stabilizer Diagram
According to the Canadian Electrical Code, it is required that you secure the
water distiller to the wall or a secure mounting surface. This will ensure that the
water distiller can never be upset. See the Water Distiller Wall Stabilizer
Diagram above. Mount the water distiller using a slotted screwdriver, a 1-1/4”
plastic clip and a #10 x 1” screw.
Water Distiller Wall Stabilizer
SCREW, ATTACHED
TO WALL
DRAIN HOSE
HOSE CLAMP
DRAIN VALVE ASSEMBLY
3/4"NPT NIPPLE LOCATED ON
THE BOTTOM OF THE DISTILLER
MOUNT CLIP