Hellwig Sway Bar 7643 User Manual

Page 2

Stiffest Hole

Softest Hole

TORQUE TABLE

BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – 1/2” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs.

SAFETY:

BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK THE WHEELS.

NOTE:

TO EASE INSTALLATION AND TO PROPERLY ADJUST BAR, THE WEIGHT OF THE VEHICLE MUST BE ON THE

SUSPENSION, AS IF DRIVING DOWN THE ROAD.

DO NOT RAISE THE VEHICLE BY FRAME.

NOTE:

THIS UNIT IS DESIGNED TO MOUNT OVER THE TOP OF THE DIFFERENTIAL WITH THE ARMS POINTING FOR-

WARD AND ATTACHES TO THE SHOCK MOUNTS USING THE ADAPTER PLATES AND U-BOLTS PROVIDED.

NOTE:

THIS KIT INCLUDES LOCK NUTS WHICH REQUIRE TIGHTENING WITH A WRENCH AFTER BEING STARTED BY

HAND.

559-734-7451 800-367-5480 FAX 559-734-7460

Maintenance and Inspection:

Your Hellwig Suspension Product is built to last. However, as with all vehicle systems, it requires routine
inspection. Inspect your Hellwig installation looking for secure hardware and tight fitting brackets and
bushings. If you do not perform this inspection, have your professional mechanic inspect as described.

Driver Side

Passenger Side

7643 ( R-7643 )

03/22/2013