Hellwig Sway Bar 55905 - Manual (Page 3)

559-734-7451 800-367-5480 FAX 559-734-7460
8. Assemble end links as shown in photos 3&7 and diagram. Tighten end link nuts until bushings start
to bulge slightly.
9. Align sway bar in D-bushings and tighten bolts attaching u-plates to mounting plate to 25 ft-lb.
10. Be sure that all bolts are tightened to specifications. Re-check your installation, check for clearance
on all undercarriage components; wiring, springs, fuel and brake lines.
11. Turn wheels full lock left and then right, check for clearance on tires, wheels and steering compo-
nents.
12. After one week of driving recheck your installation. Re-check on regular basis thereafter.
ATTENTION INSTALLER: BE SURE THAT THE CUSTOMER RECEIVES THIS INSTRUCTION
SHEET, ALL IMORTANT NOTE CARDS AND THE WARRANTY
FORM
7
5905 ( R-5905 ) 04/02/2008