Hellwig Sway Bar 5803 User Manual
Page 3
4. Insert 3/8 x 2-1/4” bolts into holes in control arm and fasten assembly with washers and
locknuts as shown in photo (5).
5. Orient sway bar as shown in photo (1) and attach using the 1/2” bolts washers and lock-
nuts.
6. Tighten 3/8” bolts to 20-25 ft-lb. Tighten 1/2” bolts to 40-50 ft-lb.
7. Bounce vehicle a couple of times and check installation for clearance to fuel and brake
lines and other components. After one week of driving recheck your installation and
fastener torque. Recheck on a regular basis thereafter.
ATTENTION INSTALLER: BE SURE THAT THE CUSTOMER RECEIVES THIS INSTRUC
TION SHEET, ALL IMORTANT NOTE CARDS AND THE
WARRANTY FORM
559-734-7451 800-367-5480 FAX 559-734-7460
5
5803 ( R-5803 )
02/15/07
See also other documents in the category Hellwig For the car:
- Pro Series Silence (2 pages)
- Pro Series 61610 (2 pages)
- Pro Series 61901 (2 pages)
- Pro Series 61905 (2 pages)
- Pro Series Standard (2 pages)
- Load Pro Series LP 25 (2 pages)
- Load Pro Series LP 15 (1 page)
- Load Pro Series 9640 (1 page)
- Load Pro Series 9655 (2 pages)
- EZ 1000 (1 page)
- EZ 991 (1 page)
- Front Helper Spring 14114 (1 page)
- Front Helper Spring 14139 (2 pages)
- Helper Spring 820 (1 page)
- Helper Spring 979 (3 pages)
- Helper Spring 982 (2 pages)
- Helper Spring 1250 (1 page)
- Helper Spring 1251 (1 page)
- Helper Spring 1510 (2 pages)
- Helper Spring 1515 (1 page)
- Helper Spring 1520 (2 pages)
- Helper Spring 1555 (1 page)
- Helper Spring 1560 (1 page)
- Helper Spring 1565 (1 page)
- Helper Spring 1901 (3 pages)
- Helper Spring 1902 (2 pages)
- Helper Spring 1906 (1 page)
- Air 6005 (6 pages)
- Sway Bar 5909 (3 pages)
- Air 6006 (7 pages)
- Air 6012 (8 pages)
- Air 6014 (7 pages)
- Air 6016 (7 pages)
- Air 6090 (21 pages)
- Air 6091 (9 pages)
- Air 6102 (7 pages)
- Air 6106 (6 pages)
- Air 6108 (8 pages)
- Air 6107 (6 pages)
- Air 6110 (9 pages)
- Air 6111 (8 pages)
- Air 6118 (7 pages)
- Air 6150 (6 pages)
- Air 6154 (6 pages)
- Air 6210 (6 pages)