Hellwig Air 6111 - Manual (Page 4)

559-734-7451 800-367-5480 FAX 559-734-7460
5. Attach axle bracket to bottom of air spring using 3/8” X 1” bolts and washers
as shown in photos. Axle bracket must be attached so that it is located under the
frame bracket with exposed slotted holes oriented outboard. For single rear
wheel models (
not required for dual wheel applications with single rear
brake hose) - Attach brake relocation bracket to driver side as shown in pho-
tos. Make sure that threaded stud and flange nut can be installed when brake re-
location bracket is installed. Torque bolts to 20-25 ft-lb.
5
Attach axle bracket so that it is located under
frame bracket with exposed slotted holes ori-
ented outboard.
DRIVER SIDE ONLY—for single wheel models (
not required for dual
wheel applications with single rear brake hose)— Attach brake relocation
bracket as shown with bracket pointing inboard on the rear side of assembly
as shown. Use 3/8” X 1-1/4” bolts and washers. Torque to 20-25 ft-lb.
Make sure brake relocation
bracket is installed so that
threaded stud and flange
nut can be installed.
Outside of Frame
F
ro
n
t
o
f
V
eh
ic
le
6111 ( R-6111) 03/01/12