GxT V087-01, Ferret 87 Self-Powered Timing Light with RPM - Manual (Page 2)

FERRET BRAND LIMITED PRODUCT WARRANTY
GxT, Inc. of Cheboygan Michigan, warrants to the original purchaser that FERRET brand products are
free from defects in materials and workmanship for a period of two years from date of purchase. Our
sole obligation for a product within the above warranties will be to repair or replace, at our option, any
defective parts and return the product to the sender within the U.S.A., shipping prepaid, if it is sent to
our Repair Department shipping prepaid and accompanied by proof of purchase.
This Warranty does not apply to products which have been altered outside the factory; or repaired by
anyone other than the factory or its authorized service centers; or which have been damaged from ac-
cidents, negligence, or abuse; or have been used differently than described in the printed instructions.
Please note that wear and tear on leads and replacement of consumable items such as: NOx Sensors,
Oxygen Sensors, and paper, is not covered by warranty.
GxT Inc.’s sole liability and buyer’s exclusive remedy is limited to repair or replacement of the product
as stated in the Limited Product Warranty. THERE ARE NO OTHER WARRANTIES EXPRESSED OR
IMPLIED INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
AND GxT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARIS-
ING FROM THE SALE OR USE OF THE PRODUCT.
Some states do not allow limitations on the length of implied warranties nor exclusion or limitations of
incidental or consequential damages, so that the above limitations and/or exclusion may not apply to
you.
This warranty gives you specifi c legal rights and you may also have other rights which may vary from
state to state.
SAFETY PRECAUTIONS
—Read All Instructions Before Using The An a lyz er—
Always wear eye protection when testing ve hi cles. Be extra care ful near batteries and moving parts. Do not lay tools on a
battery.
Battery gas is highly explosive. If a battery explodes fl ush the acid away from skin with generous amounts of water. Follow
up with a neutralizing so lu tion of baking soda and then more water.
Keep the space around a battery well ventilated. Do not make sparks or allow fl ames near batteries.
Before working on a vehicle set the brakes and block the wheels. Beware of automatic parking brake releases.
Keep your work area well ventilated and free of exhaust.
Keep spark producing devices at least 0.5m (18") above the fl oor to reduce the hazard of igniting gasoline vapor.
Do not let test leads wind up in a moving fan or pulley. Route leads away.
Remove fi nger rings and metal wrist bands. They can short ter mi nals and become very hot from electric current.