Appendix, Using the usb port as a usb-ethernet connection – Grace Digital GDI-IRCA700 Primo User Manual

Page 52

APPENDIX

Using the USB Port as a USB-Ethernet Connection

Your radio is equipped with 801.11n Wi-Fi card for a wireless connection to your

wireless router that is connected to your internet service. Your radio may also connect

using the USB port with the use of the Grace Digital

USB-Ethernet adaptor (separate

USB-Ethernet adaptor purchase required) .

Once you have a Grace Digital

USB-Ethernet adapter, remove the power from the

radio then insert into the USB port, plug the radio back into the power. After the radio

boots up please go to the main menu and select ‘settings’ then ‘Network Config’ then a

new menu item will be displayed named ‘ Wired / wireless’. Select this menu and select

‘wired only’. Your radio will now connect to your Ethernet connection.

IMPORTANT

If you boot up (power on) the radio without a

USB-Ethernet adaptor connected to the

radio's USB socket, the radio will only recognize a USB thumb drive connected to the

USB socket. If a

USB-Ethernet adaptor is connected to the radio after the unit is

booted up, the unit will NOT recognize the connection. To have the unit recognize the

USB-Ethernet adaptor connection, the unit must then be rebooted (powered off and

powered back on) while the adaptor connected to the USB port.

The radio will be able to access a USB thumb drive when the

USB-Ethernet adaptor is

removed and when a thumb drive is connected to the USB socket.