Grace Digital GDI-IRCA700 Primo - Manual (Page 40)

39
Settings
You are able to adjust various settings on your Grace Primo Radio. These can be found by selecting
the ‘Settings’ icon from the Home page of the radio.
Please Note If you make a mistake at any point, press the ‘Back’ button to go back to the previous
screen.
Network Configuration
Enables you to scan again for connection to another wireless network, or to manually configure the
network parameters. Use this if you take the Internet radio to another building where you want to
use it, or if you change your wireless router.
Properties
Details of the exact software release, serial numbers and other radio specifications.
Network Firmware Upgrade
Use this option to download new firmware for the radio from the Grace Digital Audio portal on the
Internet. If there is new firmware available, then the radio will prompt you If you want to download it
or not. Note, at this stage, you can press the radio’s ‘Back’ button to cancel the radio beginning a
firmware upgrade.
Important Note A Firmware upgrade may take several minutes, so do not switch off the power to
the radio until the operation is complete otherwise the radio may become permanently damaged.
Language
This control allows you to change the display language. After you change the language the radio
will reboot.
Factory Reset
Puts all the settings back to their defaults as they were when the unit left the factory. If you perform
a factory reset on your radio you will lose all your presets and your wireless network connection.
Please note that your radio’s serial number will still be registered with your Grace Digital internet
radio account (assuming you already registered the radio). Any premium station passwords, my
stuff stations and podcast that were saved on our web site will be saved and re-associate with your
radio after you power back on, log onto your network.