Global Specialties 1506 User Manual

Page 9

The purchaser agrees to assume all liabilities for any damages
and/or bodily injury which may result from the use or misuse of
this device by the purchaser, his employees or agents.

This warranty is in lieu of all other representations or warranties
expressed or implied and no agent or representative of Global
Specialties is authorized to assume any other obligation in
connection with the sale and purchase of this device.

Specifications subject to change without notice.

 Copyright 1994, INTERPLEX ELECTRONICS, INC,
Unit No.2, Highland Industrial Centre 1486, Highland Avenue,
Cheshire CT 06410, U.S.A.

and TM trademarks are the property of INTERPLEX

ELECTRONICS, INC, Unit No.2, Highland Industrial Centre
1486, Highland Avenue, Cheshire CT 06410, U.S.A.

CASE DISASSEMBLY AND ASSEMBLY

WARNING

Potentially lethal AC power is present whenever the line cord is
plugged into the AC outlet, even when the power switch is OFF.
Always disconnect the power cord when opening the case.
Avoid touching the fuse post on the inside of the unit.

Should access to the inside of the unit be required, proceed a
follows:

1. Remove the line cord from the AC outlet before disassembly.

2. To disassemble the case, remove the screws that secure the

cover to the chassis and lift the cover off.

3. To reassemble the case, place the cover on the chassis, line

up the screw holes, and replace the screws.

MAINTENANCE AND RECALIBRATION

ADJUSTMENTS

All circutry is factory-calibrated. No user adjustments are
required.

FUSE REPLACEMENT

Remove the line cord from the AC outlet before changing fuses.
Using a screwdriver, remove the fuse holder cap. Replace the
fuse with another fuse of identical type and current rating.
Replace the fuse holder cap.