Global Specialties 1507 User Manual
Global Specialties Power suppliers

1507
Features:
•
Variable isolated AC output from 0-150 VAC
•
Continuous 10 amp output current to a
maximum of 1300 VA
•
Variable current adjust
•
Two parallel three-prong AC outlets allow the
unit to be used for more than one load
•
Two 3.5” high analog meters. One monitors
AC line or output voltage and the other
displays output current or leakage
•
Leakage indicator and reset switch
•
Audible alarm to warn of “HOT” chassis or
shorts on equipment under test
•
Output overload indicator
•
AC input fuse protected
Overview:
The 1507 is designed to provide
isolated AC output variable from 0 to
approximately 150 volts. It can supply a
continuous 10 amp output current to a
maximum of 1300 VA. The output
current can be set to the maximum
output desired, at which point a latching
relay will open the circuit and reduce
output volts and amps to zero. Two
parallel, three-prong AC sockets are
provided to allow the operator to use
the unit for more than one load.
The 1507 also includes a leakage tester
that can measure AC leakage current in
electrical/electronic equipment in order
to verify if the leakage is within limits
established by UL, CSA, etc.
Variable AC Power Supply 0-150 VAC, 10 A
The 1507 is
perfect for:
Educational
instruction
Industrial
prototyping
Dual loads
Leakage testing