GeoVision Case Study for GV-Hot Swap Recording Server System - Manual (Page 15)

15
6. Ethernet Cable Requirements
When installing, each Ethernet cable cannot exceed 100 meters. In order for the PoE
switches to deliver power without problem, it is recommended to use Cat 5 / 5e and Cat 6
cables. The high quality Ethernet cable reduces lost during power transmission. The wiring
cable types are as below.
10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA / TIA-568 100-ohm (Max. 100 m)
100BaseTX: 2-pair UTP/STP Cat. 5 cable, EIA / TIA-568 100-ohm (Max. 100 m)
1000BaseT: 4-pair UTP/STP Cat. 6 cable, EIA / TIA-568 100-ohm (Max. 100 m)