GeoVision Case Study for GV-Hot Swap Recording Server System - Manual (Page 11)

11
After installing the network cards needed, divide networks into multiple subnets or segments,
and then organize IP channels received and clients transmitted into different networks.
1. Assign each network card to a different IP address and subnet mask.
2. Organize IP channels and clients into groups and then assign each group to different
network cards using the IP addresses you have set up.
 1 MP / 3 MP Source Video
 2 MP Source Video
GV-Recording Server +
6 Network Cards assigned on different networks
GigaLAN 1, 64 CH
IP Video
Devices
Clients
GigaLAN 3, 75 CH
GigaLAN 4, 75 CH
GigaLAN 5, 75 CH
Receiving Transmitting
GigaLAN 2, 64 CH
GigaLAN 6, 75 CH