Product specification, Battery used in the lcd monitor – ELRO DWH SERIES VIDEO SECURITY SYSTEM User Manual
Page 39

39
PRODUCT SPECIFICATION
Recording Tmie for Memory Card (32GB max)
SD Card Capacity
Single Camera (480x272)
Multiple Camera (320x240 QVGA)
1GB
200 Minutes
130 Minutes
2GB
400 Minutes
260 Minutes
8GB
1,600 Minutes
1,040 Minutes
16GB
3,200 Minutes
2,080 Minutes
32GB
6,400 Minutes
4,160 Minutes
Battery Used In the LCD Monitor
The LCD monitor is fitted with a 3.7V 1800mAH (Li-ON) rechargeable battery pack.
If the power supply adaptor is kept connected to the monitor then the battery will
begin recharging until fully charged. The monitor can still be used if left connected
to the power supply adaptor even the battery is fully charged.
Note:
A. From zero charge, the rechargeable battery takes approximately 8 hours to
reach full charge.
B. The rechargeable battery will maintain 80% of its efficiency within the 300
charge-discharge cycle.
C. The rechargeable battery is not user displaceable. Do not try to change the
battery or remove the battery.
Maximum channels
Communication Range
LCD Monitor Resolution
Camera Resolution
Operating Temperature
Operating Voltage
Current Consumption
Night Vision
Dimension
Battery
Camera
500mA (MAX)
150 metres in open space
800 x 480
Single Camera: 480x272 / Multiple Camera: 320x240
-10
o
C ~ 50
o
C
DC 5V / 1A
8m
Receiver
800mA (MAX)
151x74x49 mm
N/A
184x128x28 mm
3.7V 1800mAH (LI-ON)
4