ELRO DWH SERIES VIDEO SECURITY SYSTEM - Manual (Page 20)

Camera Pairing
Your camera is paired to the monitor at the factory to channel 1.
To add new camera(s) to your system, you have to pair it to the different
channel(s).
1. Tap the camera image you want to pair. A processing icon displays
for a 60 second countdown.
2. Press and release the Pairing button on that camera’s power cord
(see page 12). The system will indicate pairing is successful when
pairing completes.
3. The system will automatically adjust the Camera On screen.
Camera Activation
When you add a camera to your system, the system will turn on the
camera automatically.
An X indicates a camera is OFF, a check indicates ON. Tap on the
camera to turn it ON or OFF.
20
SYSTEM OPERATION
Camera Setup Screen
Tap on camera setup.
This screen should display: