Burkert Type 8045 - Manual (Page 2)

Kit 00551775
Replacing the finger gasket
- Remove the green FPM gasket from the finger
- Insert the new black EPDM gasket correctly so that the tightness is ensured.
If the device is already installed into a pipe, take all the necessary
precautions by dismantling it: power off, pipe uncharged,...
Inserting the obturator
The cable gland obturator ensures the tightness of the device when using only one cable gland.
- Unscrew and remove cable gland nut
- Insert obturator (by large end)
- Screw nut back and tighten.
Inserting the multi-way seal
- Unscrew and remove cable gland nut
- Remove the seal inside the cable gland
- Insert the multi-way seal
- Screw nut back and tighten.