Autostart AS-1412 User Manual
Page 10

P. 10
Installation Guide
AS-1412
to re-enter all option selections for all functions of the Mode you are accessing. You may not
skip Functions*.
*NOTE: Pressing the Brakes at any given moment will save the selection(s) you have entered
and will return you to the Programming Center.
For each Function, select one of the three Options by pressing the corresponding
button on the Transmitter:
Button
,
for Option
1,
Button
,,
for
Option
2,
Buttons
, ,,
for
Option
3.
Table 3
Programming Options
MODE 1
(* indicates default setting)
FUNCTION 1 – Ignition-controlled Door Locks
OPTION 1*
Ignition-controlled Door Locks
DISABLED
OPTION 2
Ignition-controlled Door Locks
ENABLED
OPTION 3
Ignition-controlled Door Locks
DISABLED
FUNCTION 2 – Secure Lock
OPTION 1*
Secure Lock
DISABLED
OPTION 2
Secure Lock
ENABLE
FUNCTION 3 – Passive / Active Arming of the Starter Kill
OPTION 1*
Starter Kill
PASSIVE
(1-minute timeout.)
OPTION 2
Starter Kill
ACTIVE
OPTION 3
Starter Kill
PASSIVE
(3-minute timeout.)
FUNCTION 4 – Lock Pulse Duration
OPTION 1*
7/10-second
LOCK / UNLOCK
pulses
OPTION 2
4-second
LOCK / UNLOCK
pulses
OPTION 3
7/10-second
LOCK
pulse and two 1/4-second
UNLOCK
pulses
FUNCTION 5 – Flashing LED
OPTION 1*
Enabled
OPTION 2
Disabled
MODE 2
(* indicates default setting)
FUNCTION 1 – Engine Run Time
OPTION 1
4-minute Run Time in Gas Mode / 9-minute in Diesel Mode.
OPTION 2*
15-minute Run Time in Gas Mode / 20-minute in Diesel Mode.
OPTION 3
25-minute Run Time in Gas Mode / 30-minute in Diesel Mode.
FUNCTION 2 – Idle Mode
OPTION 1
Idle Mode
DISABLED
OPTION 2*
Idle Mode
ENABLED
OPTION 3
Idle Mode
DISABLED
FUNCTION 3 – Engine Type – Gas or Diesel
OPTION 1
DIESEL
Engine Mode (in Cold Weather Mode Run time 20 min).
OPTION 2*
GASOLINE
Engine Mode
OPTION 3
DIESEL
Engine Mode