BJM Pumps JX1500HSS-F - Manual (Page 7)

7
OIL FILL QUANTITY/TYPE
Qty. oil in seal chamber
Models U.S. fl. oz. C.C. Type of oil
J400-F 5.1 150 ISO 32 NSF Food Grade Mineral Oil
J750-F 9 265 ISO 32 NSF Food Grade Mineral Oil
J1500-F 9 265 ISO 32 NSF Food Grade Mineral Oil
Qty. oil in seal chamber
Models U.S. fl. oz. C.C. U.S. fl. oz.
J1500H-F 9 265 ISO 32 NSF Food Grade Mineral Oil
Qty. oil in seal chamber
Models U.S. fl. oz. C.C. Type of oil
JX400SS-F 5.1 150 ISO 32 NSF Food Grade Mineral Oil
JX750SS-F 10.1 300 ISO 32 NSF Food Grade Mineral Oil
JX1500SS-F 10.1 300 ISO 32 NSF Food Grade Mineral Oil
Qty. oil in seal chamber
Models U.S. fl. oz. C.C. Type of oil
J1500HSS-F 10.1 300 ISO 32 NSF Food Grade Mineral Oil
Note: The stator on this model is oil filled. This needs to be changed annually
when the seal oil is changed. With the power cable entry removed, fill the motor
chamber with oil to a level that insures the oil is covering the motor windings by
½”, and that will be above the upper bearing. Do not overfill, an air gap of 10-15%
must be maintained for heat expansion.
PUMP INSTALLATION
J-F & JX-F Series pumps have been evaluated for use with water or water based
solutions. Please contact the manufacturer for additional information.
Lifting:
Attach a rope or lifting chain (not included) to the handle (or lifting rings) on the top of
the pump.
Do not lift the pump by the power cable or discharge hose/piping.
Proper lifting equipment (rope/chain) must be used.