Flowline LC1X Compact Controller - Manual (Page 2)

Step One
SPECIFICATIONS
Supply voltage: 120 / 240 VAC, 50 - 60 Hz.
Consumption: 5 Watts max.
Strobe type: 10_1: N/A
10_2: Xenon tube
Strobe flash: 10_1: N/A
10_2: 1 per second
Sensor inputs: LC10: (1) two-wire level switch
LC11: (2) two-wire level switches
Sensor supply: 13.5 VDC @ 27 mA
Contact type: LC10: (1) SPDT
LC11: (1) Latched SPDT
Contact rating: 250 VAC, 10A, 1/4 hp.
Contact latch: LC10: N/A
LC11: Select On/Off
Contact delay: 0 to 60 seconds
LED indication: Sensor, relay & power status
Electronics temp.: F: -40° to 158°
C: -40° to 70°
Enclosure rating: NEMA 4X (IP65)
Enclosure material: 10_1: PP (U.L. 94 VO)
10_2: PP (U.L. 94 VO) and Polycarbonate
Enclosure mount.: 100_: 3/4” NPT
105_: 3/4” Rp
Enclosure rotation: 300° swivel base
Conduit entrance: Single, 1/2" NPT
Certificate number: LR 79326-3
CE compliance: EN 61326 EMC
EN 61010-1
Safety
Part Number Information:
Part # Thread Description
LC10-1001 (1) (2) 3/4” NPT High or Low Relay Controller
LC10-1051 (1) (2) 3/4” BSP High or Low Relay Controller
LC10-1002 (2) 3/4” NPT High or Low Relay Controller with Strobe Alert
LC10-1052 (2) 3/4” BSP High or Low Relay Controller with Strobe Alert
LC11-1001 (1) (2) 3/4” NPT Automatic Fill or Empty Relay Controller
LC11-1051 (1) (2) 3/4” BSP Automatic Fill or Empty Relay Controller
(1) Adding -CE to end of part number signify CE configuration of controller
(2) Adding -E to end of part number signify 240 VAC configuration of controller
1.0"
(25mm)
4.7"
(1
19mm)
2.8"
(71mm)
3.2"
(81mm)
1.0"
(25mm)
2.8"
(71mm)
3.2"
(81mm)
6.4"
(162mm)
INVERINVER
T
+/- +/-
LALA
TCHTCH
DELAY
AC
AC
GND
NC
C
NO
R R
P P
Input 1A
(+)
(-)
115 VAC
220 VAC
Input 1B
(+)
(-)
INVERINVER
T
+/- +/-
DELAY
AC
AC
GND
NC
C
NO
R R
P P
Input 1A
(+)
(-)
115 VAC
220 VAC
Latch/Invert Logic
Time Delay
Sensor
Input
1A
Sensor
Input
1B
(LC11 only)
+ - + -
NO
NC
COM
AC
AC
GND
RELAY
POWER
SUPPLY
Dimension:
LC1_-10_1
Dimension:
LC10-10_2
Internal Controller Logic
LC11-1001 Faceplate LC10-1001 Faceplate