Flowline LU78 EchoSwitch - Manual (Page 30)

30 of 34 MN300282 Rev A
APPENDIX Step Eight
Setup: Setup will display setting for all functions of EchoSwitch®. Use this feature to confirm the
configuration of the sensor.
1. In TOP‐LEVEL MENU, select HELP.
2. Select SETUP.
3. Setup will list the following settings:
a. UNITS, HEIGHT, FILL_H, RELAY1*, RELAY2*,
RELAY3*.
b. * Each relay will list the following settings:
i. Relay Function, On Setting, Off Setting,
Safe Setting and Delay
4. Select EXIT to return to TOP‐LEVEL MENU.
Reset: Reset enables the entire sensor or specific relays to be reset to factory settings.
1. In TOP‐LEVEL MENU, select HELP.
2. Select RESET.
3. Select R ALL, RST 1, RST 2 or RST 3.
a. R All – Resets the entire EchoSwitch®
b. RST R1 – Resets only the settings associated
with Relay 1
c. RST R2 – Resets only the settings associated
with Relay 2
d. RST R3 – Resets only the settings associated
with Relay 3
4. Select EXIT to return to TOP‐LEVEL MENU.