Flowline LU29 EchoSonic II - Manual (Page 8)

8
Mounting the EchoSonic® II
The sensor should always be mounted perpendicular to the liquid surface using the
provided Viton® mounting gasket. Insure that there are no restrictions or obstacles in the
path of the ultrasonic signal. Further mounting information can be found on the Flowline
website at
www.flowline.com .
Mounting with a Tank Adapter:
Select a tank adapter fitting, such as the LM52‐2890.
Mounting with a Riser:
As installations with tall, narrow risers can impede the acoustic signal. 2" diameter risers
should be no taller than 5". Larger diameter risers should be no taller than 12".
Mounting with a Side Mount Bracket:
Use Flowline's LM50‐1001 side mount bracket.
Riser Mounting Side Mounting
with LM50‐1001