EXP Computer ThinLan 110 - Manual (Page 7)

WINDOWS NT INSTALLATION
This section provides some guide-line to install the ThinLan PC Card under
Windows NT. There are two different setup procedures available: 1, Installing the
ThinLan PC Card during the Windows NT installation. 2, Installing the ThinLan
PC Card after the Windows NT has already been installed into your system.
Follow the instruction below whichever matches with your particular Windows NT
version.
WINDOWS NT 3.51 INSTALLATION
First time installation
This section is for users whose computers are not Windows NT pre-installed. If
your computer is already Windows NT installed, skip this section and go to next
section for Adding the ThinLan PC Card directly.
The setup program for Windows NT will attempt to detect a network card during
the installation. After failing to detect the ThinLan PC Card, the installation
program will prompt you a dialog box to continue. Click on ‘Continue’ twice. The
‘Add Network Adapter’ dialog box will be displayed. Under ‘Network Adapter
Card’ click on the Down arrow button. Scroll down to the end and select ‘< Other
> Requires disk from manufacturer’ click on ‘Continue’ button. At the Insert Disk
dialog box type in A:\WINNT, then click OK.
At the Select OEM Option the ThinLan PC Card should be highlighted. Click OK.
The default IRQ Level and I/O Port Address can be changed if necessary. Click at
Continue button. Select network protocol whichever matches your existing
protocol. Continue finishing the Windows NT setup.
Adding the ThinLan PC Card
This section is for users whose computers are Windows NT already installed. If
your computer is not yet Windows NT installed, go back to the previous section to
install the ThinLan PC Card during the Windows NT installation.
To install the ThinLan PC Card, perform the following procedures. Go to Main
Group, click on Control Panel then click on Network icon.
From the Network settings screen you should be able to click on Add adapter.
Under the Add network adapter select ’ Requires disk from manufacturer’.
Insert the ThinLan PC Card diskette as the following screen appears. Type in
directory A:\WINNT, then click OK.