eLine Technology ANPTZ-JSCONTRL - Manual (Page 3)

(4) kerboard instruction
Zoom In
Shortcuts Function
Zoom Out
Far Focus
Near focus
Iris In
Iris Out
Open the main menu speed dome
Press and hold for 3 seconds to open the keyboard menu
Backspace
Confirm key
Speed dome address minus 1
Speed dome address plus 1
Shift button
Speed dome turn up and menu
Down navigation key, you can control the speed dome turn down and
menu down
Left navigation keys, control the speed dome turn left.
Right navigation keys to control the speed dome turn right.
Enter the number of speed dome, press the [Cam] button, select the
target ball machine
Enter the alarm device number, press [Alam] button, select the target
alarm equipment
Enter the monitor number, press the [Mon] button, select the target monitor
Transferred to the target location of the speed dome, press [Set] button,
enter the preset number [N] and press [Pre] key, set the preset point
Enter the preset number [N], press [Pre] key, call preset points
Hold [Shi] [Set] simultaneously hold, screen display Clear:,
enter the preset you want to delete, then press the [Pre] key to delete
the preset point
Press [Set] [1] [Scan] to set the level of the left scanning limitation
Press [Set] [2] [Scan] to set the the level of right scanning limitation.
Press the [Scan] boot horizontal scan.
Hold [Shi] [Set] simultaneously , screen display Clear:,
press [Scan] to stop the horizontal scan
Press [Set] [N: on behalf of the path number] [Pat], screen display
Set Pattern N, then press the [N: on behalf of the preset point] [Pre]
Note that you can call the number by N + Pre preset point, press
[Set] [Pat] end of the setting.
Press [N] [Pat] or [Pat] start scanning pattern
Hold [Shi] [Set] simultaneously hold, screen display Clear:, press
[Pat] to stop scanning pattern
Press [N] [Tour] or [Tour] Start cruise
Hold [Shi] [Set] simultaneously , screen display Clear:, press
[Tour] to stop cruising