eLine Technology SIP MileStone Software Guide User Manual

Page 5

10. You can select stream2 stream3. This matches the Stream ID as shown before on the IE settings

page

11 Just to do a test you can click the Preview Image, this is a good check just to prove your settings

and format.

12. The one thing to keep in mind is that it is always best to use the IE browser to modify the stream

settings, as this is the master control for the camera parameters. see previous section on this element.

Note: if you find you can’t detect the Onvif camera, it maybe that you have changed the default port

inside camera, you can just use the manual option on the wizard to enter the IP and port numbers as

required.

PTZ

PTZ Cameras function well with Milestone be sure to set the following details when you add a PTZ

device to Milestone software.

eLineTechnology.com