eLine Technology EYS-SIP - Manual (Page 2)

eLineTechnology.com/support/documents Support 303.938.1133 Page 2
The ribbon will change to ‘Settings’. Select ‘Devices’ to install cameras.
Click the ‘Search’ icon to detect cameras.
Select the device on the left side – and on the dialog that appears on the right – Enable the camera – and
select the default eyStream server. (last line of the dialog – does not appear in this image)
Camera image should appear.
Add all cameras and click ‘Apply’ at bottom of page.
Now select ‘Archive’ from the ribbon
Select camera and select ‘Initiated recording’ And ‘Yes’ for ‘Default archive’.
Add all cameras and click ‘Apply’ at bottom of page.