eLine Technology EFB_EEFB User Manual - Manual (Page 3)

CAMERA ELI‐EFB/EEFB USER MANUAL eLineTechnology.com
Page | 3
Product Description
Indoor Full Body Box Camera
Congratulations on your purchase of this product. This analog surveillance camera features advanced
functions in a compact body and is suited for tight, indoor environments such as a corridor or elevator.
The camera utilizes advanced Sony image sensor technology producing high definition, realistic color.
Features
 Indoor housing
 High Resolution 650 or 700 TV Lines
 C/CS Lens Mount
 Low Light Illumination
 Day / Night
 Digital Wide Dynamic Range, On Screen Display, 3D Digital Noise Reduction, Sense‐UP
 12V DC or 12V DC/24V AC (Model Dependent)
Models
Model Number Resolution Lens Features
ELI‐EFB‐65 650 TVL Sold Separately
ELI‐EEFB‐70 700 TVL Sold Separately Effio Chip, Dual Voltage
Safety Information
1. Read these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Clean only with dry cloth.
5. Do not block any ventilation openings.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus including amplifiers)
that produce heat.
7. Only use attachments/accessories specified by the manufacturer.
8. Pay attention to the power requirements.
9. Stop operation immediately when something is wrong with the product. If smoke or the smell of smoke comes from
the product, continued use will result in fire, injury, or damage to the product.
10. Turn the power off immediately and contact qualified service personnel for service.
11. Be sure to turn off the power before wiring. Failure to observe this may cause electric shock. A short circuit or wrong
wiring may cause fire
12. This product has no power switch. Turn the power off when cleaning the product.
13. When continuously viewing a bright light source such as a spotlight, the color filter of the CCD may have deteriorated
and it may cause discoloration. Even when changing the fixed viewing direction after continuously viewing a spotlight
for a certain period, the discoloration may remain.
14. Keep the camera cable away from the lighting cable. Failure to observe this may cause noise.
15. When the camera is used near a TV/radio antenna, strong electric field, or magnetic field (near a motor or a
transformer), images may be distorted and audible noise may be produced. In such a case, route the camera cable
through specialized steel conduit tubes.