DE DIETRICH AWHP MIT-IN iSystem - Manual (Page 20)

4.3.3. Forcing domestic hot water production
To force domestic hot water production, proceed as follows:
1. Press the r key.
2. To select the desired parameter, turn the rotary button.
3. To modify the parameter, press the rotary button.
To go back to the previous display, press the key j.
4. To modify the parameter, turn the rotary button.
5. To confirm, press the rotary button.
To cancel, press key h.
Menu r
Parameter
Description Factory setting
AUTOMATIQUE The domestic hot water comfort ranges are determined by the timer programme.
COMFORT Domestic hot water comfort mode is forced until the time indicated or all the time (7/7). Present time + 1 hour
4.3.4. Setting the contrast and lighting on the
display
1. To access user level: Press the > key.
2. Select the menu #SETTING.
4
Turn the rotary button to scroll through the menus or
modify a value.
4
Press the rotary button to access the selected menu
or confirm a value modification.
¼For a detailed explanation of menu browsing, refer to
the chapter: "Browsing in the menus", page 13.
3. Set the following parameters:
User level - Menu #SETTING
Parameter Adjustment range Description Factory setting Customer setting
CONTRAST DISP. Adjusting the display contrast.
BACK LIGHT COMFORT The screen is illuminated continuously in
daytime periods.
ECO
ECO The screen is illuminated for 2 minutes
whenever pressed.
MODE
C002268-A
bar
1
1
2
2
D
STD
J I
E
0 2 4 6 8 10 12 14 16 18 22 24 20
# F
AUTO % $
<
: !
SUNDAY 11:45
C002219-D-04
4. Operating the appliance AWHP MIT-IN iSystem
19 09/01/13 - 300027618-001-02