2 safety instructions and recommendations, 1 safety instructions, 2 recommendations – DE DIETRICH WHE 2.24 _ WHE 2.24 FF User Manual
Page 4: Safety instructions and recommendations, 1 safety instructions 2.2 recommendations
4
WHE 2.24 / WHE 2.24 FF
17/07/2008 - 300011777-001-C
2. Safety instructions and recommendations
2 Safety instructions and recommendations
2.1 Safety instructions
Fire hazard
Do not stock products of an inflammable nature close to
the appliance.
If you smell gas, do not use a naked flame, do not smoke,
do not operate electrical contacts or switches (doorbell,
lights, motor, lift, etc.).
1.Cut the gas supply
2.Open the windows
3.Extinguish all flames
4.Evacuate the premises
5.Contact a qualified professional
6.Inform the gas supplier
Risk of intoxication
Do not obstruct the air inlets in the room (even partially).
If you smell flue gases
1.Switch the appliance off
2.Open the windows
3.Evacuate the premises
4.Contact a qualified professional
Risk of being burnt
Avoid direct contact with the flame viewport.
Depending on the settings of the appliance:
- The temperature of the flue gas conduits may exceed 60°C
- The temperature of the radiators may reach 95°C
- The temperature of the domestic hot water may reach 65°C
Risk of damage
Do not stock chloride or fluoride compounds close to the
appliance.
Install the appliance in frost-free premises.
Do not neglect to service the appliance: Contact a qualified
professional or take out a maintenance contract for the annual
servicing of the appliance.
2.2 Recommendations
Warning
Only qualified professionals are authorised to work on the
appliance and the instalation.
Warning
`
Before any work, switch off the mains supply to the appliance.
`
Before any work, close the main gas valve.
`
Check regularly that the installation contains water and is
pressurised.
`
Keep the appliance accessible at all times.
`
Avoid draining the installation.
`
Use only original spare parts.
`
Never remove or cover labels and rating plates affixed to the
appliance.
`
The appliance should be on Summer or Antrifreeze mode rather
than switched off to guarantee the following functions:
- Cleaning the pumps
- Antifreeze protection
- Protection against corrosion on domestic hot water tanks fitted
with a titanium anode