DE DIETRICH NEO 2.1 - Manual (Page 19)

4.5.2. Tools required
4.5.3. Dimensions
Side A B C D E (1) F (1) G (1) H (1) I (1)
Dimensions
(mm) 1960 <
250
1400 to
1700
60 1100 2204 3306 4408 5510
(1) Minimum length of the mounting rails
4
To install a large number of solar collectors, it is sufficient to place
side-by-side or to superimpose the configurations described in this
chapter.
4
You will need 4 hooks (adapted to the roof covering) to fit the first
battery sensor and 2 hooks for each additional sensor.
4
Fitting on hooks: If the gap between the chevrons makes it
impossible to respect dimension B at both extremities of the bank
of solar collectors, 2 additional roof anchors are required.
M001753-A
M001752-A
I
NEO 2.1 / SUN 211 4. Installation
05/10/09 - 300020210-001-B 18