Asus A8N-VM CSM User Manual

Page 73

A S U S A 8 N - V M C S M

2 - 3 3

2.6.2

Boot Settings Configuration

Set this item to [Enabled] to use the ASUS MyLogo2™ feature.

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]

Add On ROM Display Mode [Force BIOS]

Sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]

PS/2 Mouse Support [Auto]

Allows you to enable or disable support for PS/2 mouse.
Configuration options: [Disabled] [Enabled] [Auto]

Wait for ‘F1’ If Error [Enabled]

When set to Enabled, the system waits for the F1 key to be pressed when
error occurs. Configuration options: [Disabled] [Enabled]

Select Screen
Select Item

Change Option

General Help

F10 Save and Exit
ESC Exit

BIOS SETUP UTILITY

Boot

Boot Settings Configuration

Quick Boot

[Enabled]

Full Screen Logo

[Enabled]

AddOn ROM Display Mode

[Force BIOS]

Bootup Num-Lock

[On]

PS/2 Mouse Support

[Auto]

Wait for ‘F1’ if Error

[Enabled]

Hit ‘DEL’ Message Display

[Enabled]

Interrupt 19 Capture

[Disabled]

Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.